Using components available from the misting system for the patio you can install a patio mister on your patio within a few hours, Patio Mister at a Low Cost with a total cost ranging from $50 to $100. The required materials include drip tubing and misting nozzles, which can transform water into a refreshing cloud of cool mist. This simple yet ingenious technology is highly sustainable, as it requires only a minimal amount of water compared to traditional sprinklers for cooling purposes.
Also check out
- Cool DIY Patio and misting system
- Patio Misters Size Guide
- What is The Best Patio Misting System?
- What to Look Out For In a DIY Patio Misting System
What Materials Are Needed for The Cost of Patio Mister
Creating a homemade patio mister at a low cost involves some DIY creativity and resourcefulness Here is the outlook of some important factors to look for before investing in the misting systems.
Material preparation:
- Misting Nozzles (Plastic or Brass): Brass Nozzle 0.016” Orifice/0.4 mm
- Zip Ties or Hose Clamps: You can choose Mist Kit to save some money. There are kits inside
- Hose Splitter (Optional)： Hose Splitter 2 Way Heavy Duty
- Water Source (Outdoor Faucet)：3/4″Faucet Adapter
- Timer (Optional)： Hose Timers1s～59s
Installation guide
Step 1: Measure and cut the PVC pipe
Measure the length of your patio area where you want to install the misting system. Cut the PVC pipe into equal lengths to cover the desired area. Make sure to leave some extra pipe for connecting corners.
Step 2: Connect the PVC pipe
Using the PVC pipe connectors, join the cut PVC pipe sections together to create the desired shape for your misting system. Consider creating a rectangle or square shape to cover the patio area effectively.
Step 3: Drill holes for the misting nozzles
Using a small drill bit, drill holes in the PVC pipe at regular intervals. The spacing depends on your preference, but typically 6-12 inches apart is ideal. Ensure that the holes are aligned along the top side of the PVC pipe.
Step 4: Install the misting nozzles
Screw the misting nozzles onto the drilled holes. Make sure they are tightly secured to avoid any leaks. The misting nozzles should be facing downwards, pointing towards the area you want to cool.
Step 5: Attach the hose connector
Attach the hose connector with a 10/24 thread size to one end of the PVC pipe. Use a hose clamp to secure it tightly, ensuring no water leakage.
Step 6: Connect the hose
Connect one end of the hose to the hose connector on the PVC pipe. Attach the other end of the hose to a water source, such as a garden hose.
Step 7: Test the misting system
Turn on the water source and check if the misting system is working correctly. Adjust the water pressure if necessary, ensuring a fine mist is being sprayed.
Step 8: Secure the misting system in place
Depending on your patio setup, secure the misting system to the desired location using zip ties or other suitable methods.
Also Read : Choose the Best Quality LDPE Sheets in India
